Completed Jobs by Alpha Omega Disaster Restoration

October 23, 2025 | Laurel, MT

A pre-mitigation DocuSketch was created to document the site. Workers removed an AFD and scoped the work, identifying demo areas in the office and supply closet. Moisture meters were used to confirm affected particleboard and 6 square feet of carpet, which were then addressed. Drying equipment, specifically an air mover, was ...

October 17, 2025 | Laurel, MT

We initiated the restoration process by setting up an Air Filtration Device (AFD) in the basement area with the affected carpet. Our team then cut and bagged all the damaged carpet and pad underlay. A significant portion of the pad had adhered to the concrete subfloor, which we meticulously removed ...

October 17, 2025 | Billings, MT

Alpha Omega Restoration Pros completed all necessary demolition inside the main level bathroom. They squared the sheetrock that was cut by the plumber. They used IQ to remove microbial growth in both the main level bathroom and garage. The team completed one full wet wipe and one HEPA vacuum inside ...

October 16, 2025 | Billings, MT

After monitoring moisture points and observing minimal progress (highest at 17%), drying equipment was pulled from the open cavity. A general cleanup was performed, and the zipper door and rest-up door to the bedroom were removed. Post-mitigation documentation (dokusketch) was completed, and mitigation efforts are now complete.

October 10, 2025 | Red Lodge, MT

An Air Filtration Device (AFD) was set up near the crawlspace access. The loose inactive growth was removed using a HEPA vacuum. The affected wood was then sanded down to eliminate dark staining.

October 9, 2025 | Billings, MT

Water mitigation services were successfully completed. Monitoring showed good progress, and all drying equipment was pulled. A general cleanup was performed, and a post-mitigation dokusketch was made, indicating the completion of the mitigation phase. The customer is now interested in reconstruction services.

October 5, 2025 | Billings, MT

Alpha Omega Restoration Pros provided comprehensive water damage restoration services. This involved assessment and mitigation of water damage in the kitchen, bathroom, living room, and bedroom, as well as addressing exterior issues. Specialized drying equipment, such as fans and dehumidifiers (indicated by hygrometer readings), were deployed to ensure proper moisture ...

October 5, 2025 | Laurel, MT

Alpha Omega Restoration Pros conducted an assessment of the commercial building and recommended removing the affected drywall due to water damage and potential microbial growth. The customer opted to handle the recommended work independently, resulting in no direct work performed by Alpha Omega Restoration Pros on this occasion.

October 2, 2025 | Joliet, MT

Alpha Omega Restoration Pros performed comprehensive sewage cleanup and restoration services. This included emergency water extraction, removal of contaminated debris and affected materials, thorough cleaning and sanitization of all impacted surfaces in the basement and bedroom, and professional drying of the affected areas to prevent mold growth. Our team also ...

October 2, 2025 | Pompeys Pillar, MT

Moisture monitoring was conducted, and it was determined that the open cavity areas would continue to dry naturally. All drying equipment was subsequently pulled as mitigation was deemed complete. No reconstruction was required. However, the legs of the tables remained highly elevated in moisture and may require replacement.

October 1, 2025 | Billings, MT

AJ from Alpha Omega Restoration Pros arrived on site, performed demolition by pulling wood base in the affected area, and removed non-extractable carpet pad. Antimicrobial agent was sprayed on the carpet. Moisture points were set, and hydro-extraction was completed. Professional drying and dehumidification equipment were set up to restore the ...

October 1, 2025 | Billings, MT

Alpha Omega Restoration Pros' team completed the sanding of all heavy stained and mold-affected areas in the attic. This was followed by a thorough HEPA vacuuming of all affected areas to ensure complete removal of mold spores and debris. All equipment was then removed, signifying the completion of the mold ...

October 1, 2025 | Billings, MT

Our team, led by JM, arrived on site to assess the moisture situation. Recognizing that the current drying equipment was not effectively reducing moisture in the open cavity areas, we removed the drying equipment. Following this, a general cleanup was performed. To facilitate complete drying and access, the zipper door ...

September 2, 2025 | Billings, MT

We completed a full mold remediation and water damage mitigation service. Our team set up sealed containment using 6-mil plastic and established negative air pressure with HEPA air filtration. All non-restorable and mold-affected porous materials, including drywall, damaged framing, and the shower unit, were carefully removed. Remaining non-porous materials were ...

September 2, 2025 | Billings, MT

While setting up the containment wall, the ceiling light’s glass cover was accidentally bumped and shattered. Our team immediately informed the homeowner of the incident, safely cleaned up the broken glass, and ensured the area was left secure and safe before continuing work.