Completed Jobs by Alpha Omega Disaster Restoration

July 19, 2026 | Billings, MT

During this final site visit, our team took comprehensive moisture readings across all previously affected areas to verify that every structural material had returned to acceptable dry standard conditions. Once dry status was confirmed, we dismantled and removed all installed restoration equipment, including dehumidifiers and air movers. To officially close ...

June 29, 2026 | Billings, MT

Following initial site clearing by maintenance—who removed damaged drywall ceilings and insulation—our technicians inspected the affected multi-room areas and established containment protocols for containment-level remediation. We detached and removed unsalvageable flooring components, including contaminated carpet, padding, tack strips, quarter-inch underlayment, and compromised vinyl floating floors. To address microbial ...

June 29, 2026 | Billings, MT

Upon arrival, our technician conducted a property-wide inspection to locate the leak source and cleaned up and disinfected the small amount of standing water beneath the stairway. We completed a comprehensive DocuSketch scan and moisture mapping to accurately document affected interior building materials, identifying elevated moisture levels in the pool ...

June 27, 2026 | Billings, MT

Upon arriving at the property, our team conducted comprehensive moisture mapping across the basement family room and bedroom to determine the spread of the water loss. Moisture meter readings confirmed that while the carpet and padding were affected, the surrounding drywall remained structurally sound with minimal moisture impact. We completed ...

June 26, 2026 | Billings, MT

Upon arriving at the property, our team carefully wrapped and prepared the affected area rugs for transport to our facility, where they will undergo shop drying and off-site professional cleaning. We conducted comprehensive moisture mapping throughout the family room carpet and the drywall surrounding the fireplace. To facilitate proper structural ...

June 25, 2026 | Billings, MT

Our team initiated mitigation by carefully removing the water-damaged kitchen drywall to expose internal plumbing lines and assess the full extent of the rot within the wall framing and floor joists. To access hidden moisture pockets and facilitate thorough structural drying, we detached and removed the affected kitchen countertops and ...

June 23, 2026 | Billings, MT

Upon arriving at the commercial property, our team conducted a complete DocuSketch scan and mapped the affected lower-level spaces. To prevent cross-contamination, we moved affected contents out of the storage room and staged them safely in the bar/lounge area on top of protective plastic sheeting. We applied antimicrobial disinfectant ...

June 22, 2026 | Billings, MT

Our technician performed comprehensive moisture mapping across all wall surfaces, flooring, and ceiling access points inside the closet storage area. Testing confirmed that nearly all surrounding materials metered completely dry, with the exception of a single, localized elevated moisture reading along the middle section of the lower wall. We inspected ...

June 18, 2026 | Billings, MT

Our team immediately addressed the standing water by draining trapped moisture out of the air vents and main ducting trunk lines. To target hidden saturation underneath the kitchen cabinets without full demolition, we drilled strategic ventilation holes into the toe kicks. We then performed controlled demolition in the basement to ...

June 17, 2026 | Huntley, MT

Our team conducted a thorough site assessment, detaching portions of the damaged baseboards to reveal hidden mold growth along the wall assembly. We developed a comprehensive remediation plan that includes removing the affected MDF baseboards and establishing three distinct containment areas using plastic barrier walls in the lobby and office ...

June 16, 2026 | Billings, MT

Our team arrived on-site to perform a comprehensive damage assessment and secure the property. We installed heavy-duty plywood board-ups over the compromised window openings to protect the building interior against weather exposure, unauthorized entry, and further property loss. Additionally, we prepped the site for the full restoration scope, which includes ...

June 15, 2026 | Billings, MT

Our team conducted an initial inspection by lifting the affected carpeting to evaluate hidden dampness across the carpet padding, tack strips, and subfloor assembly. We developed a full restoration plan that involves removing the water-damaged carpet and padding, assessing subfloor and wall integrity, and installing professional structural drying equipment along ...

June 15, 2026 | Billings, MT

Our team executed a full site inspection to evaluate the extent of moisture intrusion along the floor edges, subfloor layers, and vertical wall assemblies. We positioned ladders and specialized access tools to inspect upper structural cavities, ceiling tiles, and exposed brick plaster walls for hidden dampness. The restoration scope includes ...

June 15, 2026 | Roundup, MT

Our restoration team initiated structural drying across all salvaging materials throughout the main level and crawlspace using commercial air movers and dehumidifiers. To prevent moisture retention and structural damage, we performed controlled demolition to remove unsalvageable flooring materials, including sheet vinyl in the break room and bathroom areas. We conducted ...

June 15, 2026 | Billings, MT

Our team began by conducting comprehensive moisture mapping across all affected basement areas, identifying that roughly 75% to 80% of the bedroom ceiling was saturated, with water actively draining through the ceiling vent and light fixture. To mitigate immediate damage, we detached the glass surround from the light fixture to safely drain ...