Completed Jobs by Alpha Omega Disaster Restoration

August 4, 2026 | Huntley, MT

We performed a comprehensive water damage inspection, verified that the living room materials were dry, and identified microbial growth along the shared wall (including the tack strip and carpet) alongside trapped moisture between the subfloor and floating floor in the laundry room. We completed DocuSketch documentation along with restoration macros, ...

August 4, 2026 | Billings, MT

We completed demolition work by removing sections of sheet vinyl flooring and cutting baseboards to inspect and verify that microbial growth stayed within the containment boundary. We initiated cleaning procedures starting with a general HEPA vacuuming from top to bottom, followed by a thorough top-to-bottom wipe-down. We then applied Surface ...

August 3, 2026 | Billings, MT

We completed a water damage inspection and restoration job to assess the damage, removed affected drywall and underlying materials to expose the wall cavity for proper inspection and drying, and evaluated the carpet and surrounding areas to prepare the structure for drying and subsequent restoration.

July 31, 2026 | Billings, MT

Our water damage restoration team performed an immediate multi-point inspection and thermal moisture assessment to map affected drywall and tile. We initiated professional structural drying, contained the bathroom tile floor for targeted extraction, monitored relative moisture levels using precision moisture meters, and inspected the crawlspace and ducting to prevent secondary ...

July 27, 2026 | Billings, MT

Our restoration specialists completed an on-site structural inspection and moisture mapping across the property. We identified elevated moisture levels contained to three specific basement rooms (two bedrooms and one bathroom), while confirming the main level and basement living room remained completely unaffected. We deployed industrial drying equipment directly onto the ...

July 27, 2026 | Lodge, MT

Our team completed an extensive structural moisture assessment of the crawl space, examining the load-bearing beams, subfloor, and floor joists for water saturation and mold. We documented disconnected and damaged PVC plumbing pipes, mapped out affected subfloor insulation for removal, and developed a targeted restoration plan to address plumbing repairs, ...

July 27, 2026 | Columbus, MT

Our emergency mitigation team completed a comprehensive moisture mapping inspection across all suspected rooms, confirming the drywalls and main carpet sections remained undamaged. We performed standing water extraction in the men’s and women’s restrooms and executed specialized extraction on the saturated carpet. All affected tile and hard flooring ...

July 27, 2026 | Billings, MT

Our restoration crew performed water extraction, pulled back the carpet, and removed and disposed of the non-salvageable carpet pad. We applied Mil-Go antimicrobial treatment to both sides of the carpet, reset it over the tack strips, and deployed a low-grain refrigerant (LGR) dehumidifier and axial air movers. To dry the ...

July 24, 2026 | Billings, MT

Our restoration team performed an on-site multi-room moisture mapping and thermal assessment across two bedrooms, a bathroom, a utility room, a den, and the foyer. We identified severe mold colonization on porous materials and established a remediation protocol requiring 3rd-party lead/asbestos testing, removal of affected flooring and the bottom ...

July 23, 2026 | Billings, MT

Our restoration team completed an immediate inspection across the bathroom, mechanical room, hallway, living room, and two bedrooms. We verified that the carpet padding remained salvageable and extracted all carpeted areas using a high-performance Floor Rover extraction tool. We extracted mud and ground water from the mechanical room and bathroom, ...

July 21, 2026 | Billings, MT

Our restoration crew removed approximately 20 square feet of saturated Sheetrock in the public bathroom, inspected the underlying foam board insulation behind the OSB sheathing, and created targeted containment bubbles using plastic poly sheeting and layflat ducting. We deployed Sahara air movers, axial fans, and commercial dehumidifiers to inject heated dry ...

July 20, 2026 | Shepherd, MT

Technicians performed a comprehensive moisture inspection using precision moisture meters to evaluate affected areas, opened the ceiling drywall to expose the framing, and implemented targeted drying and restoration measures to protect the structure

July 20, 2026 | Red Lodge, MT

Our team completed an on-site structural moisture assessment, mapped moisture migration along the shower pan and subfloor, performed digital moisture readings near the floor register and shower threshold, collected photographic documentation, and executed a DocuSketch 3D scan to establish an accurate scope of work for the restoration and rebuild process.

July 20, 2026 | Billings, MT

Our emergency mitigation team moved and protected contents from the office and shop bathroom, completed an on-site moisture map, and captured a pre-mitigation DocuSketch scan. We performed bulk water extraction across all affected flooring, removed water-damaged MDF baseboards in the lobby and women's restrooms, and drilled targeted access holes into ...

July 20, 2026 | Billings, MT

Our mitigation team deployed drying equipment to restore moisture levels across the concrete slab and wooden staircase. We utilized a sump pump to safely extract and drain collected water from the crawlspace, conducted daily moisture and atmospheric monitoring until dry standards were met, removed all drying equipment upon project completion, ...