Completed Jobs by Alpha Omega Disaster Restoration

July 21, 2026 | Billings, MT

Our restoration crew removed approximately 20 square feet of saturated Sheetrock in the public bathroom, inspected the underlying foam board insulation behind the OSB sheathing, and created targeted containment bubbles using plastic poly sheeting and layflat ducting. We deployed Sahara air movers, axial fans, and commercial dehumidifiers to inject heated dry ...

July 20, 2026 | Shepherd, MT

Technicians performed a comprehensive moisture inspection using precision moisture meters to evaluate affected areas, opened the ceiling drywall to expose the framing, and implemented targeted drying and restoration measures to protect the structure

July 20, 2026 | Red Lodge, MT

Our team completed an on-site structural moisture assessment, mapped moisture migration along the shower pan and subfloor, performed digital moisture readings near the floor register and shower threshold, collected photographic documentation, and executed a DocuSketch 3D scan to establish an accurate scope of work for the restoration and rebuild process.

July 20, 2026 | Billings, MT

Our emergency mitigation team moved and protected contents from the office and shop bathroom, completed an on-site moisture map, and captured a pre-mitigation DocuSketch scan. We performed bulk water extraction across all affected flooring, removed water-damaged MDF baseboards in the lobby and women's restrooms, and drilled targeted access holes into ...

July 20, 2026 | Billings, MT

Our mitigation team deployed drying equipment to restore moisture levels across the concrete slab and wooden staircase. We utilized a sump pump to safely extract and drain collected water from the crawlspace, conducted daily moisture and atmospheric monitoring until dry standards were met, removed all drying equipment upon project completion, ...

July 19, 2026 | Billings, MT

During this final site visit, our team took comprehensive moisture readings across all previously affected areas to verify that every structural material had returned to acceptable dry standard conditions. Once dry status was confirmed, we dismantled and removed all installed restoration equipment, including dehumidifiers and air movers. To officially close ...

July 17, 2026 | Roundup, MT

Our restoration team removed the affected tile baseboards and unscrewed the water-stained, odorous plaster backer board along the source wall. We chased the extended mold growth into the adjacent wall framing, cleared debris and broken glass from the work area, inspected the sump pump system and egress window well, and ...

July 17, 2026 | Laurel, MT

Our restoration team performed an exterior roof and chimney flashing inspection along with an interior ceiling moisture assessment. We identified compromised asphalt shingles and damaged ceiling drywall, developed a targeted structural drying plan, and applied antimicrobial mold treatments to sanitize the affected surfaces and prevent microbial growth.

July 17, 2026 | Billings, MT

Our team executed moisture meter readings and thorough visual inspections to identify all affected areas. We removed non-salvageable materials, treated and sanitized the spaces, deployed commercial-grade structural drying equipment, and established an ongoing moisture-monitoring protocol to prepare the property for final repairs.

July 16, 2026 | Billings, MT

Our certified team conducted an on-site structural inspection and moisture assessment, checking moisture levels under baseboards, cabinetry, and around the water heater closet. Because active mold colonization was present on materials that would typically be dried, standard air-moving mitigation was withheld to prevent cross-contamination. We documented the full scope of ...

July 14, 2026 | Billings, MT

Our team assessed all structural drying test points, verified that previous moisture points had successfully dried, and removed all layout tape and unneeded drying units from the art room. We performed HEPA vacuuming across the living and art room floors, identified a remaining moisture saturation point in the utility room ...

July 9, 2026 | Billings, MT

Our crew performed selective touch-up demolition on affected flooring and treated exposed subfloor sections with IAQ antimicrobial solution. We set up containment with negative air using an AFD 500 air scrubber, followed by a multi-stage cleaning protocol including complete top-to-bottom HEPA vacuuming and wet wipe treatments, preparing all exposed materials for ...

July 7, 2026 | Billings, MT

Our restoration specialists inspected the garage framing and performed moisture readings on the wet sill plates and drywall. After the homeowner's plumber capped the failed spigot to stop the leak source, we performed a controlled flood cut, removing the water-damaged drywall up to 4 feet high along the 13-foot span. We ...

June 29, 2026 | Billings, MT

Following initial site clearing by maintenance—who removed damaged drywall ceilings and insulation—our technicians inspected the affected multi-room areas and established containment protocols for containment-level remediation. We detached and removed unsalvageable flooring components, including contaminated carpet, padding, tack strips, quarter-inch underlayment, and compromised vinyl floating floors. To address microbial ...

June 29, 2026 | Billings, MT

Upon arrival, our technician conducted a property-wide inspection to locate the leak source and cleaned up and disinfected the small amount of standing water beneath the stairway. We completed a comprehensive DocuSketch scan and moisture mapping to accurately document affected interior building materials, identifying elevated moisture levels in the pool ...